PowerVerter? 2000W Utility/Work Truck
Inverter/Charger with 2 Outlets
MODEL NUMBER: UT2012UL
Description
The UT2012UL Utility Work Truck Inverter / Charger is the quiet alternative to gas generators with no fumes, fuel
or noise. It provides equipment with utility or generator supplied AC electricity filtered through premium ISOBAR
surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated charging system
serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged work
site applications. Supplies up to 2000W of continuous 120V AC power from any 12V DC battery or automotive
DC source. OverPower output feature temporarily provides up to 150% of the continuous output for 1-60 minutes,
and DoubleBoost output feature delivers up to 200% of continuous output for up to 10 seconds, providing the
extra power needed to start heavy-duty tools and motorized equipment. When AC cable is connected to a live
wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3
stage selectable 15/60Amp charging system. In UPS mode, the APS system responds to blackouts and voltage
fluctuations with a near instantaneous automatic transfer to battery derived AC output. A set of high current DC
input terminals is included for simple installation (user supplies batteries and cabling – see owners manual for
recommendations). Passes sine wave utility or generator power during battery charging and UPS line power
operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large
transformer design (tested to UL (USA) and (CSA) Canada standards) with frequency control, powers resistive
electronic loads or large inductive motors, compressors and other devices with high current needs on start-up.
Included is the APSRM4 wired remote power switch with full status LED’s, which provides remote power inverter
on/off switching and continuous status information. The UT2012UL supports an unlimited amount of runtime with
Highlights
12V DC or 120VAC input;
120VAC output; 2 GFCI
protected outlets
2000 watts continuous, 3000
watts OverPower and 4000 watts
DoubleBoost inverter output
3 stage, 60A / 15A selectable wet
/ gel / AGM cell battery charger
Built-in Isobar? premium AC
surge protection and Auto
Transfer
Switching option for battery
backup / UPS operation
Meets OSHA requirements
Applications
Versatile inverter / charger system
with auto-transfer switching serves as
an automotive inverter for utility work
trucks, conversion vans, high humidity
environments and fleet service
vehicles; a standalone power source
for off grid, alternative energy or
export applications, emergency home
power applications such as sump
pumps, and as an uninterruptible
power supply (UPS) for items
compatible with a 16.6 millisecond
transfer time.
Package Includes
UT2012UL Inverter/Charger
APSRM4 Remote
Remote battery temperature
sensor cable
Instruction manual with warranty
information
user-supplied batteries.
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 400a should be positioned no more than 18" from the
UT2012UL's battery in the positive line.
Features
1 / 4
16.6 millisecond automatic transfer between line and battery power supports UPS protection for equipment compatible with a one cycle transfer time
2000W continuous AC output in inverter mode, 4000W continuous AC output in AC mode
相关PDF资料
UX40E10C01 SWITCH LIMIT LEAF LEVER SPDT
V-15G-1B6-K SWITCH MINI SPDT 15A PIN PLUNGER
V125 VOLTMETER LCD 200MV 0.5" DIG HT
V15H16-CZ100-K SWITCH PIN PLUNGER SPDT 250V 16A
V15H16-CZ100A02-K SWITCH STRAIGHT LEVER SPDT 16A
V15H16-CZ100A03-K SWITCH LONG STRT LEVER SPDT 16A
V15H16-CZ100A05-K SWITCH ROLLER LEVER SPDT 16A
V15H16-CZ100A06-K SWITCH LONG ROLLR LEVER SPDT 16A
相关代理商/技术参数
UT20188S 制造商:未知厂家 制造商全称:未知厂家 功能描述:ADSL Transformer for Conexant AccessRunner Chipset
UT2020 制造商:Microsemi Corporation 功能描述:STD RECOVERY RECTFR 200V 2A 2PIN E - Bulk
UT2020-001 功能描述:固定电感器 9.0mH 0.5A Choke Coil RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
UT2020-002 功能描述:固定电感器 4.5mH 0.6A Choke Coil RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
UT2020-003 功能描述:固定电感器 2.5mH 0.7A Choke Coil RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
UT2020-004 功能描述:固定电感器 1.1mH 0.9A Choke Coil RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
UT2020-005 功能描述:固定电感器 0.45mH 1.0A Choke Coil RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
UT2024-006 功能描述:固定电感器 9.0mH 0.5A Choke Coil RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm